Bad Boy MZ MAGNUM User Manual

PAGE 35
Leveling the Deck:
(1) Start on a flat surface.
(2) Rotate front casters forward.
(3) Set the air pressure in all four tires to 12 psi.
(4) Raise the deck up, and measure all four corners of
the deck to see if it is level from left to right and
front to back. All decks should be level from left to
right and have a 1/8" pitch down in the front.
(5) Adjust deck to ensure deck is level from left to right
and has a 1/8” downward pitch from the back of the
deck to the front.
If deck adjustments are necessary, the deck hanger
bolts have adjustable slots. These adjusters affect the
overall height of the deck and the level from left to right.

Bad Boy MZ MAGNUM Specifications

General

Horsepower	25 HP
Deck Material	7-gauge steel
Spindle Material	Aluminum
Blade Tip Speed	18, 500 fpm
Cutting Width	60 inches
Cutting Height	1.5 - 4.5 inches
Warranty	2-Year Bumper-to-Bumper / 3-Year Engine