Bad Boy MZ MAGNUM User Manual

PAGE 37
B
lade Removal:
To change
blades,
it
may be easier to use a piece
of
wood
to keep
the blade from turning
so that the b
o
lt
can be loosened.
Use
a
15/16” socket and impact
Drill, or a wrench and an extension to gain more
leverage. You might need to put a ¾” wrench on
top of the pulley bolt to keep the blade from
spinning. Bolts used have right-handed threads..
Re-torque the blade bolts to 90-110 lbs.
The blade spindles contain a sealed ball bearing
inside the top and bottom of the spindle. The
bearings are replaceable for a more cost effective
repair.

Bad Boy MZ MAGNUM Specifications

General

Horsepower	25 HP
Deck Material	7-gauge steel
Spindle Material	Aluminum
Blade Tip Speed	18, 500 fpm
Cutting Width	60 inches
Cutting Height	1.5 - 4.5 inches
Warranty	2-Year Bumper-to-Bumper / 3-Year Engine