Page 9
Device manual 6490B / 6490B-y / 6590B
W. Bälz & Sohn GmbH & Co. Koepffstraße 5 D-74076 Heilbronn Telefon (07131) 1500-0 Telefax (07131) 1500-21
2.8 Setting configuration points
1 Select configuration point
2a Set new value by change in individual steps and...
respectively
2b Set new value by continuous change
with increasing speed and...
3 ...confirm new value within 5s, otherwise the previous, still effective value
will be set again automatically.
4 After the new value has been confirmed by pressing
, press again to
call up the next configuration point
Back to operating level, possible at any time
To Next Page
Loading...
Need help?
General
