EasyManua.ls Logo

BAHAG JHS-A019-07KR2/E - Installation and Adjustment; Unit Installation Guide

BAHAG JHS-A019-07KR2/E
407 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
3.4Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting
protection function after the compressor is turned off.
V.Installation and adjustment
1.Installation
Warning: before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure that the
air conditioning is in the upright position and the air conditioning should be placed on a flat
surface. Do not install and use the air conditioning in the bathroom or other humid
environments.
1.1 Install the heat pipe assembly
as shown in Fig.1
Figure 1
1take out the outer connector assembly and the exhaust pipe assembly, and remove the
plastic bags;
2
insert the heat pipe assembly (the end of the exhaust joint) into the back panel vent slot
(push to the
left) and complete the assembly (as shown in figure 1).
1.2 Installation of window sealing plate components

Table of Contents

Related product manuals