containers or directly tilt the body to discharge the water into other containers.
2:Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the
dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
3:Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping
plug and the drainage cover.
4:Remove the exhaust pipe and keep it properly.
5:Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it out of
the reach of children, and take dust
6:Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine components properly.
IX.Troubleshooting
Do not repair or disassemble the air conditioning by yourself. Unqualified repair will lead
to failure of the
warranty card, and may cause damage to users or their properties.
The air
conditioning
does not work.
Turn it on after connecting it to a socket
with electricity.
The overflow indicator displays
"FL".
Discharge the water inside.
The ambient temperature is too
low or too high
Recommend to use the machine in at the
temperature of 7-35
℃
(44-95
℉
).
To Next Page
Loading...
