Baicells Nova430 - Technical Specification; Hardware Specification

3
Identity
Color
Status
Description
Fast flash: 0.1s on,0.1s off
CELL1 is in deactivated.
Slow flash: 1s on,1s off
CELL1 is in activated.
CELL2
Green
OFF
CELL2 is in inactivated.
Fast flash: 0.1s on,0.1s off
CELL2 is in deactivated.
Slow flash: 1s on,1s off
CELL2 is in activated.
ALM
Red
Steady On
Hardware alarm
OFF
No alarm
Technical Specification 1.4
1.4.1 Hardware Specification
Item
Description
LTE Mode
LTE TDD
LTE Frequency
Band48
Channel Bandwidth
5MHz, 10MHz, 15MHz, 20MHz per carrier
Output Power
24 dBm per antenna
Receive Sensitivity
-100 dBm
Synchronization
GPS
Backhaul
1 RJ-45 Ethernet interface (1 FE/GE)
MIMO
DL 2 x 2 on each carrier, 2 carriers
Dimension (HxWxD)
with joint: 381x 227 x 75 millimeters
without joint and handle: 311 x 227 x 75 millimeters
Installation Type
Pole or wall mount
Antenna Type
 External high-gain antenna compatible with eNB N-Type
connectors
 External GPS antenna, N-Type connector
Power Consumption
Typical 20W, MAX 25W
Power Supply
PoE++, comply with IEEE 802.3bt standard
Weight
4.75kgs (with pre-installed bracket)
4.35kgs (without bracket)
MTBF
≥ 150000 hours
MTTR
≤ 1 hour
NOTE: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.