To Next PageTo Next Page
Need help?Do you have a question about the Baileigh Industrial BS-330SA and is the answer not in the manual?
Buyer must inspect goods within 10 days of receipt. Payment constitutes final acceptance.
Seller may change specifications to improve safety or operation.
Warranted for 12 months against defects in material/workmanship if used per manual.
Express or implied warranties are disclaimed.
Seller not liable for incidental/consequential damages.
Seller not responsible for delays beyond reasonable control (acts of God, etc.).
Buyer is responsible for installation and indemnifies seller for improper installation.
Seller not responsible for work by others; buyer responsible for safety devices.
Seller's rights and remedies are cumulative.
Buyer liable for seller's attorney fees in legal action.
Governed by Wisconsin law; venue in Manitowoc County or Eastern District of WI.
10-day acceptance, RGA required, items must be new/original packaging.
Alert symbol indicates potential for personal injury. Follow precautions.
Explains DANGER, WARNING, CAUTION, NOTICE signal words and their meanings.
Wear safety glasses or suitable eye protection when working on or around machinery.
Wear hearing protection to prevent hearing impairment or loss from loud noise.
Warning about cancer and reproductive harm from chemicals.
Moving saw blade can cause injury. Do not operate with guards removed.
Use caution in high voltage areas. Follow lockout procedures.
Machine can be stopped immediately by pressing the E-STOP button.
Use machine for intended purpose; avoid modifications; warranty invalidation.
Precautions for cleaning the machine, avoiding hazardous products.
Machine must be sited on a level concrete floor for accuracy.
Ensure the floor can support the machine's weight and is level.
Allow adequate space for operation and material handling.
Locate power supply safely to avoid tripping hazards.
Instructions for mounting and tilting the drip tray.
Instructions for positioning and securing the chip tray.
Instructions for installing and adjusting the material stop.
Instructions for mounting the laser guide assembly.
Procedure for aligning the laser guide for accurate cutting.
Details on the machine's voltage and frequency requirements.
Electrical connection guidelines, circuit protection, and grounding.
Steps for connecting the power cord safely.
How to connect the plug and check motor direction.
Characteristics and common uses of regular tooth blades.
Characteristics and uses for positive rake tooth blades.
Advantages of combo tooth blades for smoother cuts and longer life.
Daily checks and preparation for machine operation.
Step-by-step procedure to start and run the saw.
Methods for safely stopping the machine in various situations.
How to adjust the work stop-bar for angle cutting.
How to position the blade guides for optimal support.
Adjusting the limit switch for automated saw arm return height.
How the automatic shut-off feature functions and its adjustment.
Adjusting the angle of the movable vise jaw.
Moving the vise along the table.
Daily maintenance checks and tasks.
Weekly maintenance tasks.
Monthly maintenance checks.
Information about bearing lubrication.
Procedure for draining and refilling the coolant.
Recommended coolant fluid and its properties.
General| Type | Horizontal Bandsaw |
|---|---|
| Coolant Pump | Yes |
| Max Cutting Capacity at 90° | 13" Round |
| Blade Speed | 80/120/200 FPM |
| Blade Size | 1" x 0.035" |
| Motor | 1.5 HP |
| Voltage | 220V |
