Baintech PowerTop User Manual

IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THIS APPLIANCE READ ALL SAFETY AND USAGE
INSTRUCTIONS LOCATED ON THE APPLIANCE AND IN THIS
MANUAL
These warnings apply to the appliance, and also where applicable, to all tools, accessories,
chargers or mains adapters.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY
1. This appliance is not intended for use by young children, or infirm persons with reduced or
impaired mental or physical capabilities, or persons with a lack of knowledge and experience
unless directly under the supervision or instruction of a responsible party to ensure that safe
use conditions are met.
2. This appliance is not a toy. If this appliance is in use in the vicinity of children, proper attention
and supervision must be given to ensure that they do not play with this electrical device.
3. Use only as described in this manual. Do not undertake any maintenance unless described in
this manual or advised recognized Service personnel.
4. Suitable for use in dry conditions only. Operate under shelter with adequate protection from
elements.
5. Do not handle any part of the appliance with wet hands.
6. Damaged electrical cords are a hazard, In the case of damaged or frayed electrical cord DO
NOT USE and seek replacement from manufacturer or similarly qualified person.
7. If the appliance is not working as it should, is damaged, or has been dropped, submerged in
water or exposed to the elements for an extended period of time, discontinue use immediately
and contact suppliers Customer Service.
8. Do not disassemble. Contact suppliers Customer Service when service or repair is required.
9. Do not stretch or place electrical cables under strain. Avoid placing cable where it can be
stepped on or tripped over.
10. Keep appliance away from sources of fire and high temperature.
11. Avoid contact with and submersion in water.
12. Use only recommended accessories and replacement parts. Do not use any high capacity DC-
DC charger beyond the recommended maximum charging current of 20A
13. If used in vehicle, ensure that the appliance is secured and fixed in place.
14. Charge in a well-ventilated location
15. Do not go beyond the maximum recommended load for each socket or panel
16. Warning against recharging non-rechargeable batteries
17. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
If supply cord is damaged, it must be replaced by a special cord or assembly available from
the manufacture or its service agent.
-Include a warning against recharging non-rechargeable batteries.
Important Safety Instructions
Before using this appliance read all safety and usage instructions located on
the appliance and in this manual.
These warnings apply to the appliance, and also where applicable, to all tools,
accessories, chargers or main adapters.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY
VISIT WWW.BAINTECH.COM.AU FOR FURTHER INFORMATION
2
PowerTop V2 Manual www.baintech.com.au

Baintech PowerTop Specifications

General

Continuous Power	300W
Peak Power	600W
USB Output	5V/2.1A
Power Output	300W Continuous, 600W Peak
Cooling	Fan Cooled
Efficiency	85%
Protection Features	Over Temperature, Short Circuit

Summary

Important Safety Instructions

General Safety Precautions

Read all safety and usage instructions for the appliance, tools, accessories, chargers, and adapters.

Essential User Guide Overview

LED Indicators Explained

Explanation of the 6 LED indicators for charging status, voltage, and operation.

Voltage Alarms & Shutdowns

Details on low and high voltage alarms and automatic shutdown thresholds.

Voltage Readings and Capacity

Table showing battery voltage levels and corresponding charge percentages.

Solar and Vehicle Charging Info

Guidance on solar and vehicle charging requirements and specifications.

PowerTop Technical Specifications

Key Unit Features

Overview of the PowerTop's main features including battery, charger, and ports.

LED Indicator Meanings

List of the 6 LED indicators and their meanings.

Anderson Connector Details

Details on the three colour-coded 50A Anderson connectors and their uses.

Technical Data Summary

Specifications for battery type, charger, voltage, protection, and dimensions.

Important Operating Guidelines

Mounting and Ventilation Best Practices

Instructions on ensuring proper mounting, ventilation, and avoiding water contact.

Connection Polarity Assurance

Ensuring correct polarity for all connections, especially to Anderson connectors.

Included Accessories

AC Charging Cord Usage

Description of the AC cord for charging the PowerTop from a mains power supply.

Tricolour Anderson Plug Guide

Details on the three colour-coded Anderson plugs and their specific uses for charging and loads.

Charging Methods and Indicators

Internal AC Charging Process

Instructions for charging using the built-in 6.6A AC charger and MAINS LED status.

Fast Charging Recommendations

Guidance on using a 20A charger for faster charging with specific voltage set points.

Recognizing Charge Status

Interpreting Voltage Charge Levels

Understanding voltage readings (13.2V to 11.0V) to determine battery charge level.

Charging Time Estimates

Information on charge times for AC, DC, and solar charging methods.

Unregulated Solar Charging

Connection and Panel Limits

Connecting unregulated solar panels to the Red Anderson connector, with voltage and wattage limits.

Solar Charging LED Status

Explanation of the SOLAR/EXT LED for indicating charging status with solar panels.

Regulated Solar Charging

Controller Requirements

Requirements for solar charge controllers and connection to the Grey Anderson connector.

Standard Alternator Vehicle Charging

Connection and Voltage Input

Connecting to the Blue Anderson plug for vehicle charging, with voltage and fuse requirements.

DC-DC Charger Vehicle Charging

DC-DC Charger Specifications

Requirements for DC-DC chargers, including current and voltage set points for connection.

Smart Alternator Hookup

Guidance for using a DC-DC charger with smart alternators via the Grey Anderson socket.

LED Indicators and Audible Alarms

Voltage Alarms Explained

Explanation of low and high voltage audible alarms and their trigger points.

LED Status Descriptions

Detailed explanation of the FLAT BATTERY, BOOST, and FLOAT LED indicators.

Connecting Loads to PowerTop

Grey Anderson Load Output

Details on the Grey Anderson connector for load output and its protection.

12V DC Power Sockets Usage

Information on Ciga, Engel, and USB sockets, including maximum load and protection.

Best Practices and Warnings

Recommended Actions (DO'S)

List of recommended actions for proper use, charging, and maintenance of the PowerTop.

Actions to Avoid (DON'TS)

List of actions to avoid, including misuse, unauthorized opening, and improper charging.

Frequently Asked Questions

Charging and Jump-Start Queries

Answers to common questions regarding battery charging and jump-starting capabilities.

Operational and Maintenance FAQs

Resolving queries about alarms, temperature limits, battery replacement, and warranty.

Standard Alternator Charging Setup

Wiring Diagram and Requirements

Diagram illustrating vehicle charging setup for standard alternators, including voltage and wiring.

Smart Alternator Charging Setup

Smart Alternator Wiring Diagram

Diagram illustrating charging setup for smart alternators using DC-DC chargers and isolation relays.