Oil replacement :
Replace oil as per Lubrication Chart.
For Replacing Engine Oil :
• Run the engine for about 10 minutes to warm up the oil
• Place the vehicle on a level ground so that the oil settles down
• Remove oil drain plug. Let the oil drain completely
• Tighten the drain plug
• Remove oil filling plug and pour the correct quantity of recommended oil.
• Ensure oil level at top ‘C’ level of dipstick
• Fit back oil filling plug. Ensure that there is no oil leakage.
A. Oil filler hole
B. Oil drain plug
B
A
3.3 Engine Oil-Checking/Replacement
58
To Next Page