Bajaj Pulsar AS 200 User Manual

3. Clock Reset :
• Digital clock indicates time in HR & MM separated
by colon ‘:’
• It is a 12 hour clock.
• Initially ‘:’ will be blinking
• Clock setting is possible in TRIP 1 mode only.
1.
Press 'Mode' push button
for less than 2 sec.
TRIP1 Mode selected
2.
Press 'Mode' & 'Set'
push button together
for more than 2 sec.
Press 'Mode' button for
less than 1 sec.
Press 'Set' button for
less than 1 sec.
Press 'Mode' & 'Set'
button together for
more than 2 sec.
Clock set 'Mode' is
selected & no editing
is carried out for
more than 5 sec.
or
Vehicle is started.
‘:’ stops blinking
Digits start blinking
Hour digits will
increase by one.
Minute digits will
increase. If Mode/Set
button is pressed
continuously then digits
will stop blinking.
Set value will be saved
Exit clock setting mode
Digits stop blinking
‘:’ start blinking
Auto exit without saving
set value.
3.
4.
5.
6.
Speedometer Setting
13

Bajaj Pulsar AS 200 Specifications

General

Brand	Bajaj
Model	Pulsar AS 200
Category	Motorcycle
Language	English