o Brake Fluid Handling
- Store brake fluid in sealed container
- Avoid contact of brake fluid with skin.
- Don’t spill the brake fluid on painted components
o Electrical Wiring
- Carry out periodic checks & repairs
- Electrical board & Main Switch must be located such that
they are easily accessible.
o Precautions to be taken while handling Hydro-Electric Lift
- While raising / lowering the lifter bay ensure that vehicle is firmly hold
on the lifter bay to avoid accident.
- After raising the lifter bay, lock the lift.
- Don’t put leg/hand in between while raising / lowering the lifter Bay.
• Safety Tips
- Do not lower the lifter bay table without unlocking the mechanical lift
lock.
- Do not keep your leg between the top and bottom frame while
lowering the lifter bay.
- Do not work with loose clothing while working on the lifter bay.
- Do not keep hydraulic joints loose.
- Do not stand on the lifter bay’s top, when it is being operated.
- Special care is to be adopted to avoid injuries if either leg or hand is
entagled between.
- Keep off direct fire near the power pack.
- Avoid oil spillage around the working area for safety reasons.
WORKSHOP SAFETY
Pulsar 150/180 DTS-i
Service Station Manual
6
Dealer Development Center
Akurdi Pune
To Next Page
Loading...
Need help?
General
