Bajaj pulsar DTS-i - Page 121

SOP FOR DISMANTLING ENGINE
Pulsar 150/180 DTS-i
Service Station Manual
117
Dealer Development Center
Akurdi Pune
Using Sp Tool : Special Nut Puller - 37
10DJ43
Using Sp Tool : Primary Gear Holder - 3710
DJ28
Remove :
• Centrifugal oil filter special nut
• Belleville washer
• Body centrifugal oil filter assly
Remove :
• Bearing with plunger
Using Sp Tool : Special Nut Puller - 37 10DJ
43
Using Sp Tool : Primary Gear Holder -
3710DJ28
Remove :
• Input shaft special nut
• Belleville washer
• Clutch assly comp
• Spacer
Dia. = 25.9 0.1+
Note : The existing Special Nut Puller 37 10DJ 43 can be used by grinding the tool
OD to 25.9 0.1 mm+
Remove :
• 3 Assly balancer Idler gear cover bolts (A)
• Cover
• Washer
• 2 Dowel
A