Name: Bajaj pulsar DTS-i
Brand: Bajaj
Rating: 5 (1 reviews)

To Next Page

To Previous Page

GENERAL INFORMATION

Pulsar 150/180 DTS-i

Service Station Manual

Dealer Development Center

Akurdi Pune

Storage of Removed Parts

After all the parts including subassembly parts have been cleaned,

store the parts in a clean area. Put a clean cloth or plastic sheet over

the parts to protect from any foreign materials that may collect before

reassembly.

Assembly Order

In most cases assembly order is the reverse of disassembly, however,

if assembly order is provided in this Service Manual, follow the

procedures given.

Replacement Parts

Replacement parts must be BAJAJ genuine or recommended by

BAJAJ. Gaskets, O-rings, Oil seals, Grease seals, Circlips or Cotter pins

must be replaced with new ones whenever disassembled.

Inspection

Reuse of worn or damaged parts may lead to serious accident.

Visually inspect removed parts for corrosion, discoloration, or other

damage. Refer to the appropriate sections of this manual for service

limits on individual parts. Replace the parts if any damage has been

found or if the part is beyond its service limit.

Visual Inspection of Removed Parts

Questions and Answers:

Need help?

Do you have a question about the Bajaj pulsar DTS-i and is the answer not in the manual?

Bajaj pulsar DTS-i Specifications

General