Bajaj pulsar DTS-i - Page 136

ASSEMBLY - ENGINE
Fitting of Oil Seals
and Bearings :
Crankcase RH (Clutch Side)
Fit :
Use Bearing Driver set (P. No. 37 1030 74)
• Bearing for Input Shaft Assembly
Use Bearing Driver set (P. No. 37 1030 68)
Fit :
• Needle roller Bearing for Output Shaft Assembly
Use Bearing Driver set (P. No. 37 1030 74)
Fit :
• Bearing for drum change
Crankcase LH (Magneto Side)
Fit :
Use Bearing Driver set (P. No. 37 1030 74)
• Bearing for Output Shaft
Pulsar 150/180 DTS-i
Service Station Manual
132
Dealer Development Center
Akurdi Pune