Bajaj pulsar DTS-i - Page 140

ASSEMBLY - ENGINE
Align the Clutch Assembly into Clutch Housing
• Clutch Assly
Fit :
• Spacer
Clutch Assembly
Fit :
Assemble the clutch plates and friction plates in clutch center / clutch
hub.
•
• Plain Washer in Clutch Center / Clutch Hub
Belleville Washer
• Clutch Plate (A) 1 Nos
• Pressure Plate 5 Nos
• Clutch Plate (B) 4 Nos
• Clutch Plate (C) 1 Nos
• Wheel Clutch
• Springs 4 Nos.
• Thrust Plate
• Bolt
A
B
C
Note :
Ensure concentricity of Thrust Plate w.r.to Clutch Wheel, Clutch Center, Clutch
Housing.
•
Oil Pump
Fit :
• 'O' ring (A) on the Oil Strainer (B)
• Clip (C)
B
A
C
Pulsar 150/180 DTS-i
Service Station Manual
136
Dealer Development Center
Akurdi Pune