Bajaj pulsar DTS-i - Page 145

ASSEMBLY - ENGINE
Pulsar 150/180 DTS-i
Service Station Manual
141
Dealer Development Center
Akurdi Pune
Fit :
• Spring
Note :
a. Apply Loctite 638 at ‘Bolt Shift Change’ (B) if removed.
b. Ensure free movement on ‘Stopper Gear Shift’ in ‘Bolt Shift Change’.
Fit :
• Body Balancer Gear
• Lock
• Bolt (A) (Use Loctite 243)
Fit :
• Parallel Pin
• Spacer
• Guide gear shifter
• Allen Bolt (A)
Fit :
• Gear change lever assembly
A
A
B