Bajaj pulsar DTS-i - Page 153

ASSEMBLY - ENGINE
Pulsar 150/180 DTS-i
Service Station Manual
149
Dealer Development Center
Akurdi Pune
Fit :
• Tappet cap with ‘O’ ring
Fit :
• 2 Dowel
• Gasket
Note :
Always ensure that the piston is at the end of compression stroke and ‘T’ mark on
rotor is in line with the crankcase mark. When adjusting tappet clearance.
Fit :
• Magneto cover
• 5 Bolts
• Neutral switch coupler