Bajaj pulsar DTS-i User Manual

GENERAL INFORMATION
Pulsar 150/180 DTS-i
Service Station Manual
12
Dealer Development Center
Akurdi Pune
Direction of Engine Rotation
When rotating the crankshaft by hand, the free play amount of
rotating direction will affect the adjustment. Rotate the crankshaft to
positive direction (clockwise viewed from clutch cover side).
Electrical Wires
A two-colour wire is identified first by the primary colour and then
the stripe colour. Unless instructed otherwise, electrical wires must be
connected to those of the same colour.
Instrument
Use a meter that has enough accuracy for an accurate
measurement. Read the manufacturer's instructions throughly before
using the meter. Incorrect values may lead to improper adjustments.
Lubrication
It is most important to lubricate rotating or sliding parts during
assembly to minimize wear during initial operation. Apply the specific oil
or grease as specified.

Bajaj pulsar DTS-i Specifications

General

Fuel System	Carburetor
Transmission	5-speed
Kerb Weight	144 kg
Bore	57 mm
Compression Ratio	9.5:1
Wheelbase	1320 mm
Ground Clearance	165 mm
Engine Type	4-stroke, Air-cooled, DTS-i
Front Brake	Disc
Rear Brake	Drum
Front Suspension	Telescopic
Rear Suspension	Nitrox Shock Absorber
Fuel Tank Capacity	15 L
Clutch	Wet Multi Plate
Frame Type	Double Cradle
Rear Tyre	100/90 x 17 - 55 P
Starting	Self/Kick Start