SOP FOR MASTER CYLINDER PISTON KIT REPLACEMENT
• Clean master cylinder & caliper thoroughly by keeping nozzle in spray
mode before opening master cylinder top cover & caliper bleeder screw.
• Drain the brake fluid from caliper assembly by loosening air bleeder
screw & using transparent PVC tube which will avoid spillage of brake
fluid on caliper body / disc pads & also powder coating peel off /
inefficient braking.
• Remove front brake switch & brake lever.
• Remove protection boot & remove the circlip with the help of plier.
Pulsar 150/180 DTS-i
Service Station Manual
202
Dealer Development Center
Akurdi Pune
To Next Page
Loading...
