SOP FOR BRAKE FLUID REPLACEMENT
• Fit the master cylinder cover.
• Press the front brake lever and check the operation of disc brake.
f. During this process continuously monitor and maintain the brake fluid
level in the master cylinder reservoir slightly above the minimum mark.
• For drum brake vehicles, check and adjust front brake lever free play. It
should be4~5mmforallmotorcycles.
• Ensure front wheel is rotating freely.
Note :
• Use DOT-3 / brake fluid from a sealed container.
• Ensure no leakage of brake fluid through brake hose / benjo bolts /
caliper assembly.
• Carry out air bleeding if required.
DOT-4
Pulsar 150/180 DTS-i
Service Station Manual
211
Dealer Development Center
Akurdi Pune
To Next Page
Loading...
