38
Service Support - M/C
Service Station Manual
Note about engine oil level :
At Max Oil Level – Oil Level Should Be Just Below The Top Window Qadrenet Point As Marked …
Only lower position of the marking shall be present in the cover Clutch
Why Preventive Maintenance
1. What is Preventive Maintenance ?
Preventive maintenance (PM) is scheduled maintenance activity aimed at the prevention of brake downs & failures.
The primary goal of PM is to upkeep health of product through out it's life.
2. Why Preventive Maintenance ?
Preventive Maintenance is predetermined work to –
• Ensure safe functioning of product with intended reliability.
b. Reduce cost of repairs & replacement.
c. Protect assets & prolong the useful life of component / product.
3. How to perform ?
• Clean / Inspect / Lubricate / Adjust / Replace as per the PM chart & encyclopedia guidelines.
b. To correct deficiencies found through testing & inspection.
4. How to ensure execution & competency ?
• Training programs, encourage & appreciates for abnormality identification & prevention.
b. Audit & review to assure quality performance.
c. For better understanding show “Periodic Service DVD” to technicians at suitable interval.
5. How to promote compliance to PM schedule ?
a. Workshop side –
1. Ensure adherence to S.O.P. while carrying out repairs through stage wise, service wise check sheet deployment.
2. Monitor effectiveness of technicians through final inspection.
3. Monitor consumption of Periodic parts vis a vis vehicle serviced month wise.
PREVENTIVE MAINTENANCE CHART
To Next Page
Loading...
Need help?
General
