2. Short press [1] to set up the countdown duration. Every pressing within 3
seconds increases the duration by 1 minute. The longest duration allowed is 99
minutes.
3. Short press the [10] , and then long press the [10] , press a multiple of 10
minutes to quickly accumulate the countdown time, up to 99 minutes.
4. Short press the [1] , then long press the [1] , and press 2 steps/ second to
quickly accumulate the countdown time minute by minute, up to 99 minutes.
5. During time settings, short press [CLEAR] anytime if you want to clear and
exit from the countdown settings.
6. If no action takes place within 3 seconds after a countdown is set up, the
countdown automatically starts after a beep sound.
7. When countdown settings are ongoing, the time display shows the
countdown duration, and the MS and sandglass symbols (not flashing) are
displayed at the upper left corner.
8. When a countdown is in action, short press [CLEAR] anytime if you want to
clear and exit from the countdown mode, when the clock will give a beep sound.
12
To Next Page
Loading...