or long press [－]for a quick decrease (8 steps/s). After temperature settings are
complete, press [MODE] to go to the humidity value calibration mode. In this
mode, short press [＋] if you want to increase the humidity value by 1, or long
press [＋] for quick increase (8 steps/s); short press [－] if you want to decrease the
humidity value by 1, or long press [－] for quick decrease (8 steps/s). After
humidity settings are complete, press [MODE] to confirm the settings and exit
from the setting mode.
10.[＋] button functions:
In the normal time display mode (no settings are ongoing), short press this
button if you want to view the MAX/MIN values of temperature/humidity.
In the MAX/MIN temperature/humidity value review mode (no settings are on
going), long press this button if you want to clear the recorded MAX/MIN values of
temperature/humidity.
In the alarm clock viewing mode (no settings are ongoing), short press this
button if you want to turn on/off the alarm clock.
16
To Next Page
Loading...