Baker BP Dominator 3650E - Page 38

38
Inspection and Maintenance: (continued)
 DAILY - Lubricate ball screws (1 per side) with spray
grease onto the spindle. We recommend Zep 2000.
 DAILY - Lubricate the log turner chain. We
recommend Zep 2000 or heavy oil.
 DAILY - Clean
the crown on
the idler and
pull wheels
using an air
hose, brush or
by wiping them
down, freeing
them of dust
and debris.
 DAILY - Clean and inspect the blade guides. Worn guides should be replaced before use.

Figure 34A
Figure 34B
Figure 34C
Log turner chain
Idler wheel crown
Pull wheel crown
Figure 34
Left-side guide
assembly – check
parts for wear
Right-side guide
assembly – check
parts for wear