To Next PageTo Next Page
Need help?Do you have a question about the Baker SterilGARD SG504 and is the answer not in the manual?
General| Class | Class II, Type A2 |
|---|---|
| Weight | 575 lbs (261 kg) |
| UV Light | Optional |
| Width | 48" |
| Electrical Requirements | 115V, 60Hz |
| Filters | HEPA Filters |
| Type | Class II, Type A2 Biosafety Cabinet |
Overview of the SterilGARD Class II, Type A2 Biological Safety Cabinet.
Lists the available SterilGARD cabinet models.
Detailed measurements of the cabinet's external size.
Specifications for the weight of the cabinet units.
Information on laboratory service connections for the cabinet.
Requirements for the cabinet's electrical power supply.
Data on airflow rates for different exhaust configurations.
Details on exhaust duct diameters and static pressure.
Conditions under which the cabinet is designed to operate.
Instructions for initial setup and inspection of the cabinet.
Steps for readying the cabinet prior to installation.
Guidance on optimal placement of the cabinet.
Instructions for cabinets exhausting air into the laboratory.
Guidelines for connecting cabinets to external exhaust systems.
Procedures for making final connections and conducting tests.
Step-by-step instructions for assembling the channel stand.
Instructions for assembling the legs to the channel stand.
Methods and criteria for validating cabinet performance.
Procedure for measuring and verifying cabinet airflow.
Procedure for testing the sash alarm functionality.
Verification of the optional cabinet airflow alarm.
Testing the FlexAIR airflow alarm for capture loss.
Instructions for safely replacing HEPA filters.
List of electrical components and their part numbers.
List of mechanical components and their part numbers.
Guidance for troubleshooting 100/115V SterilGARD units.
Links to Baker's website and parts store.
