To Next PageTo Next Page
Need help?Do you have a question about the Baker SG403A and is the answer not in the manual?
General| Brand | Baker |
|---|---|
| Model | SG403A |
| Category | Laboratory Equipment |
| Language | English |
Steps and considerations for proper physical installation of the cabinet.
Steps for completing installation and performing initial functional checks.
Step-by-step guide for powering on and preparing the cabinet.
Best practices and techniques for safe and effective use of the cabinet.
Step-by-step guide for performing formaldehyde gas decontamination.
Procedures for checking and adjusting cabinet airflow for proper function.
Methods for testing filter integrity and airflow patterns for leaks.
Specific steps for performing leak tests on the exhaust HEPA filter.
Instructions for safely removing and installing new HEPA filters.
Steps to gain access to the cabinet's down flow and exhaust HEPA filters.
Detailed instructions for replacing the down flow HEPA filter.
Detailed instructions for replacing the exhaust HEPA filter.
Step-by-step guide for taking the biosafety cabinet apart.
Steps for installing a Hard Exhaust Connection (HEC) system.
Steps for installing a Canopy Exhaust Connection (CEC) system.
Procedure for calibrating the AFM's low flow alarm set point.
