!
Cautions
Solder tip is about 180-480℃ while using, please follow below points in case
any injury or accident:
● No using while flammable and explosive substance.
● Please make sure the parts fits to the machine before replacement.
● Power off and make the machine cool before replacing spare parts or adding
nozzle.
● Make sure the machine ground well before using.
● Do not strike or hit the machine.
● Do not open the machine or rework gun except professional staff.
● Do not change the parts of the machine.
●Please use original parts.
● Do not get the machine wet or touch the machine with wet hands.
● Please provide good ventilation environment before using.
● Please follow operation rules in case any damage to any person
or parts.
Please follow below points to keep the working environment safe and extend
life time of the machine:
Caution:
-1-
All rights reserved by our company (including but not limited to design
alteration, the final interpretation right, etc.), the picture in the catalogue is
just for reference.
To Next Page
Loading...