40940_N 02-08-19
9
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370,
6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and
domestic applied for and pending. All material copyright of Balboa Water Group.
Hold (Standby)
Sub-Menu Detail – STANDBY FOR 1 HR
Press JET Button for Pump Out/Drain, only if Drain Mode is enabled.
OR
Some spas will allow
PUMP ING OUT (Drain Mode)
with Jet 1 button
Jet 1 will toggle pump on and off.
J
While the Temperature is
still flashing, press Light
repeatedly until HOLD
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
A few seconds
Main Screen
READY
RANGE
FLTR1
a few seconds
or
To next item in
Main Menu
SET
Hold Mode – M037*
Hold Mode is used to disable the pumps during service functions like cleaning or replacing the filter. Hold Mode will last for
1 hour unless the mode is exited manually.
Drain Mode
Some spas have a special feature that allows a pump to be
employed when draining the water.
When available, this feature is a component of Hold Mode.
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel configuration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
M037 is a Message Code. See Page 18.
To Next Page
Loading...
