Need help?Do you have a question about the Balboa VS501Z and is the answer not in the manual?
General| Voltage | 120/240V |
|---|---|
| Heater | 1.0/4.0 kW |
| Ozone | Yes |
| Light | Yes |
| Circulation Pump | Yes |
| Pump 1 | 1 or 2-Speed |
| Pump 2 | Optional |
| Blower | Optional |
Details electrical installation requirements including wiring and breaker specifications.
Presents various electrical service configuration options like single, dual, and 3-phase.
Illustrates the layout and buttons of the spa control panels for different series.
Details the spa's initial startup sequence, priming mode, and temperature settings.
Explains programmable filter cycles, duration, and scheduling for various spa models.
Details the function of various control buttons for different spa models like VS/GS and GL8000.
Describes automatic freeze protection activation based on temperature sensors.
Explains how to lock and unlock the spa control panel to prevent accidental changes.
Details how to activate and deactivate temperature setting locks on the spa control.
Explains the spa's clean-up cycle, its timing, and how to change settings.
To Next Page
