BALCO HE180433 - Powering on & off; Mode selection

13
44 800 496 9698
customercare@balcolifestyle.com
Model Number HE180433
After Sales Support
Powering on & o
1. Power on:PressandholdtheMbuttonforabout3seconds;thescreenwillstartupandthe
camerawillenterstandbymode
2. Power off:Whilethecameraisinanidlestate,pressandholdtheMbuttonfor3secondstoturn
thecamerao
3. Automatic power off:Whenthecamerahasbeenidle,itwillswitchoautomaticallytosavepower.
Theidletimecanbesettoyourpreferenceinthesettingsmenu
4. Power off due to low battery:Ifthecamera’sbatterypowerhasdroppedtoextremelylowlevels,
theiconwillappearontheLCDscreenandyouwillhavetorechargethebattery
Mode selection
Thecameraisequippedwithtwomodes:Video andPhoto .Afterturningonthecamera,
quickpresstheMbuttontoselecttheappropriatemodeforyourintendeduse
1. Video mode:Recordvideos
2. Photo mode:Takephotos
ThesemodescanbemodiedintheActionCamera’smenutothefollowingchoices:
Video
SlowMotion
Loop
(Time)Lapse
Photo
Auto
Burst
Timer
TIP: If you have changed some settings and nd that the camera is not working as it should, you can
reset the camera to its original factory settings
Setup & Operation