To Next PageTo Next Page
Need help?Do you have a question about the Baldwin Estate and is the answer not in the manual?
Utilize the included template to accurately drill holes in the door for proper installation.
Adjust breakaway mounting screws based on door thickness for correct segment removal.
Install the cylinder and its collar, ensuring it is held against the door.
Install the cylinder backplate on the interior side of the door.
Position the rimlock and secure it, trimming the cylinder tailpiece if necessary.
Install the knob backplate, using the alignment bushing to mark pilot holes.
Remove the spindle, then install the rose and retaining ring.
Use the spanner to tighten the retaining ring securely.
Reinstall the spindle, ensuring correct orientation.
Install the exterior knob, aligning the set screw with the spindle notch.
Install the interior knob and brass washer, pushing against the exterior knob.
Install the keeper so it is flush with the door jamb.
General| Brand | Baldwin |
|---|---|
| Series | Estate |
| Finish Options | Polished Brass, Satin Nickel, Oil Rubbed Bronze |
| Security Grade | ANSI Grade 2 |
| Handing | Reversible (field reversible unless otherwise specified) |
| Style | Traditional |
| Power Source | Battery (for electronic models) |
| Connectivity | Bluetooth |
| Keypad | Yes |
| Warranty | Limited Lifetime |
| Backset | 2-3/8" or 2-3/4" |
| Latch Type | Deadbolt |
