To Next PageTo Next Page
Need help?Do you have a question about the baltur LC3 and is the answer not in the manual?
Defines the abbreviations and terms used in the regulator configuration table.
Details how to use the U key for initiating and managing the autotuning process.
Covers the two-stage operational modes of the boiler thermostat and alarm output.
Details the initial password required for accessing specific device functions.
Shows the electrical connections for the TLK94 controller and K30 transmitter.
Outlines the navigation and selection process for device parameters and menus.
Describes parameters related to setting target values for the controller.
Details parameters for configuring sensor inputs and measurement ranges.
Explains parameters that control the device's output signals and functions.
Covers the configuration of various alarm conditions and their responses.
Details parameters for managing loop break and heater break alarm conditions.
Outlines parameters for fine-tuning the controller's regulation and tuning functions.
Describes parameters for device interface, operator settings, and serial communication.
General| Brand | baltur |
|---|---|
| Model | LC3 |
| Category | Control Systems |
| Language | English |
