To Next Page
E
Emily GrantAug 2, 2025
What to do if the bamar Controller motorization does not turn?
- SSarah ClarkeAug 2, 2025
If the motorization does not turn, it could be due to several reasons: * Lack of electricity (the green LED is off): In this case, reconnect the grey connector (TO BATTERY), check and restore either the fuse or thermal magnet of the power line, ensure the clamps are connected to the battery, check and restore the battery charge, or replace the battery. * Interrupted connection or remote control switches: Replace the complete remote control device, including the cable and plug, or check the control circuit. * Interruption and/or oxidation of wiring between switches and BOXTRON® E14: Check and replace damaged parts, or check the control circuit. * Intervention of power fuse F2: Check the alarm that has been triggered and contact Customer Care.
General