Using Other Device Installer Features
Manual Documentation Number: MES1A/MES1B-2106m PN7138-rev001
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
40
Figure 25. Adding Info to the Device Details Tab
Upgrading Firmware
From time to time updated firmware versions for the MES1A/B may become
available (from the B&B Electronics website). Device Installer provides a
Device Upgrade Wizard which can be used to install updated firmware into
the MES1A/B.
To install firmware in the MES1A/B:
On the Device menu, select Upgrade…, or click the Upgrade icon. The Device
Upgrade Wizard – Step 1 of 5 dialog box appears.
Figure 26. Device Upgrade Wizard Step 1
50. If an Installation File (lxi) has already been created, select Use a
specific installation file (LXI) (previously saved by user)
51. If an Installation File has not been created, select Create a custom
installation by specifying individual files (Typical) and then click
Next.
52. In the Device Upgrade Wizard – Step 2 of 5 dialog box, browse to
find the Firmware (ROM, SYS & SPB) File, then click Next.
To Next Page
Loading...