Using Other Device Installer Features
Manual Documentation Number: MES1A/MES1B-2106m PN7138-rev001
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
41
53. In the Device Upgrade Wizard – Step 3 of 5 dialog box, select No
other files to install (typical), then browse and select the
previously saved Setup file.
54. In the Device Upgrade Wizard – Step 4 of 5 dialog box, click
Next. The Device Upgrade Wizard – Step 5 of 5 dialog box
appears and displays a bar graph indicating progress. Succeeded
appears next to a listing of each step as it is accomplished.
Figure 27. Device Upgrade Wizard – Step 5 of 5
Installing Pre-Saved Configuration Files
The same wizard can be used to install previously saved configuration
settings (Setup Records) into the MES1A/B. This can be useful if you want
to configure multiple MES1A/Bs with the same settings, or if you must
replace an MES1A/B and want to load identical settings into the new unit.
To use the Upgrade Wizard to install configuration setting in an MES1A/B
you must first save the settings in the form of a Setup Record.
Saving Setup Records
To save the Setup Records for a particular device (MES1A/B)
55. Select the device in the Device List.
56. On the File menu, select Save Setup Records. The Save Setup
Records dialog box appears.
To Next Page
Loading...