B&C Technologies FM7 - Cycle Programming Sequence

Cycle Programming Sequence
Cool Down
3
INC
Fill to Temp
3
INC
Drain
3
INC
Cold Water
3
INC
Hot Water
3
INC
Heating
3
INC
Chem 1
3
INC
Chem 2
3
INC
Chem 3
3
INC
Chem 4
3
INC
11
To turn on a function, press Enter, to turn off a function press Reset. Press Enter to edit a numerical
value (RPM, Time, etc.). Note: Setting a function to zero DOES NOT disable that function.
Min. Level
ENTER
3
INC
Max Level
3
INC
Temp.
3
INC
WDT
3
INC
Agitation
3
INC
RPM
More information on page 15
Level
3
INC
Temp.
3
INC
WDT
3
INC
Agitation
3
INC
RPM
More information on page 16
ON drains the machine.
-- means the drain is closed.
ON to turn on the cold water valve.
-- means the valve is off.
ON to turn on the hot water valve.
-- means the valve is off.
ON turns on the heat output, you
will be prompted to enter the temperature.
-- means the heat output is off.
ON to turn on chemical signal 1, and
flush cup 1 in the supply dispenser.
-- means the supply is off.
ON to turn on chemical signal 2, and
flush cup 2 in the supply dispenser, if
equipped. -- means the supply is off.
ON to turn on chemical signal 3, and
flush cup 3 in the supply dispenser, if
equipped. -- means the supply is off.
ON to turn on chemical signal 4, and
flush cup 4 in the supply dispenser, if
equipped. -- means the supply is off.
continued