EasyManua.ls Logo

Bandit 60FM - User Manual

Bandit 60FM
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model No: __________________________
Serial No: __________________________
DEALER:
Name: _____________________________
Address: ___________________________
City/State: __________________________
Phone No: __________________________
Delivery Date: _______________________
Copyright 6/18
MODEL 60FM / 72FM
OPERATING & PARTS MANUAL
6750 Millbrook Rd. • Remus, MI 49340 • 1-989-561-2270
MANUFACTURED BY BANDIT INDUSTRIES, INC
PHONE:
(
989
)
561-2270
PHONE:
(
800
)
952-0178 IN USA
FAX:
(
989
)
561-2273 ~ SALES DEPT.
FAX:
(
989
)
561-2962 ~ PARTS/SERVICE
WEBSITE: www.banditchippers.com
ATTENTION:
Depending on what replacement parts you are ordering, we will need the following information:
ATTACHMENT COMPONENTS
Serial Number
Model Number of Attachment
Serial No:
DEALER:
Name:
Address:
City/State:
Phone No:
Delivery Date:
Question and Answer IconNeed help?

Do you have a question about the Bandit 60FM and is the answer not in the manual?

Summary

INTRODUCTION

Signal Word Definitions

Explains safety signal words (DANGER, WARNING, CAUTION, NOTICE) and their meanings.

SERIAL NUMBER LOCATIONS

Typical Serial Number and Work Order Number Locations

Illustrates common locations for serial and work order numbers on the machine.

SAFETY PROCEDURES

General Safety Advice and Signal Word Definitions

Explains safety signal words and general precautions.

Operating Safety Precautions

Details critical safety measures during operation, like staying clear of moving parts.

EQUIPMENT SPECIFICATIONS

Model 60 FM and 72 FM Dimensions & Weights

Provides physical dimensions and weight specifications for both machine models.

DECAL LOCATIONS

Illustrated Decal Placements

Visual guide to decal placement on the machine.

DECAL INFORMATION

Decal List and Descriptions

Catalog of decals with their numbers and corresponding descriptions.

DECALS

Decal Maintenance and Care

Instructions on cleaning, maintaining, and replacing decals.

MACHINE OPERATION

Machine Orientation Reference

Diagram showing the front, back, left, and right sides of the machine.

MACHINE OPERATION

Attaching & Detaching the Forestry Mulcher

Step-by-step guide for connecting and disconnecting the mulcher attachment.

MACHINE OPERATION

Operating Procedures: Pushworking, Pullworking, Finishing

Details on mulching techniques, including initial passes and finishing.

MAINTENANCE

Daily Start Up & Maintenance

Procedures and checklist for daily pre-operation checks.

MAINTENANCE

Weekly Maintenance and Paint Care

Guidelines for weekly lubrication and paint maintenance.

MAINTENANCE

Bolt Torque Chart

Specifications for tightening various bolts on the machine.

MAINTENANCE

Belt Tension: General Rules and Cutter Head Belt

General guidelines and specific procedures for setting belt tension.

MAINTENANCE

Belt Tension Checking Procedures

Detailed steps and figures for checking cutter head belt tension.

MAINTENANCE

Cutter Head Belt & Sprocket Alignment

Procedures for aligning and installing cutter head belts and sprockets.

MAINTENANCE

Lubrication Chart

Table detailing lubrication points, frequency, and procedures.

MAINTENANCE

Cutter Head Teeth Changing Procedure

Steps for safely changing cutter teeth and inspecting the cutter head.

HYDRAULICS

Hydraulic Flows and RPM Settings

Typical hydraulic flow rates, pressure, and speed settings.

Hydraulic System Warnings

Important warnings and notices regarding hydraulic systems.

HYDRAULICS

Hydraulic Motor Adjustments

Procedures for adjusting hydraulic motor speed for the cutter head.

REPLACEMENT PARTS

Machine Components Information

Information required for ordering replacement parts, including serial and model numbers.

FORESTRY MULCHER COMPONENTS

Exploded View of Mulcher Components

Illustrated diagram showing all components of the forestry mulcher.

FORESTRY MULCHER COMPONENTS

Component Part Numbers and Descriptions

Detailed list of part numbers and descriptions for mulcher components.

CUTTER HEAD TEETH

Cutter Head Teeth Components and Part Numbers

Details and part numbers for carbide and planar cutter teeth.

HYDRAULIC COMPONENTS

Cutter Head Motors and Manifold

Identifies specific hydraulic motors and the cutter head manifold.

SERVICE RECORD

Maintenance Service Log

A log for recording service dates, descriptions, and amounts.

Bandit 60FM Specifications

General IconGeneral
BrandBandit
Model60FM
CategoryLawn and Garden Equipment
LanguageEnglish