Need help?Do you have a question about the Bang & Olufsen Beocenter 9300 and is the answer not in the manual?
General| Model | Beocenter 9300 |
|---|---|
| Frequency Response | 20 - 20, 000 Hz |
| FM Range | 87.5 - 108 MHz |
| LW Range | 150 - 350 kHz |
| Year introduced | 1986 |
| Preset Radio Programmes | 20 |
| Long-wave sensitivity | 20 µV/m |
| Tape Transport | Auto Reverse |
| Frequency range (Tape) | 30Hz - 16kHz |
| Power supply | 220-240V |
| Input Options | Auxiliary input |
| Cassette deck | Built-in |
| Output | 2 x 40W RMS |
| MW Range | 522-1620kHz |
Place the Beocenter 9300 on a solid, horizontal surface, away from direct sunlight or heat sources.
Remove transport screws before use; re-insert them for safe transport to protect the CD drive mechanism.
Connect FM and AM signals to the marked sockets for optimal radio reception.
Connect active speakers via Power Link or passive speakers via SPEAKER sockets for audio output.
Connect external devices like TVs, tape recorders, or record players to specific sockets.
Connect MCL cable for room distribution; connect headphones to the front PHONES socket for private listening.
Program Beocenter and Beovision for different room setups using Beolink 1000 remote control.
Clean surfaces with a soft, dampened cloth. Use mild detergent for general cleaning, window cleaner for glass.
Clean tape heads, pinch rollers, and other parts tape touches periodically to ensure performance.
Handle CDs by edges, wipe with dry lint-free cloth. Avoid heat, humidity, and writing on surface.
Store tapes in a box, tighten tape if loose, protect recordings by removing latches.
To Next Page