Need help?Do you have a question about the Bang & Olufsen Beogram 4000 and is the answer not in the manual?
Technical parameters for the motor unit.
Technical parameters for the pickup cartridge and arm.
Procedures for physical alignment and calibration of components.
Calibrating pickup arm movement, balance, and tracking.
Procedures for calibrating electronic functions and voltages.
Methodology and symbols for troubleshooting.
Step-by-step diagnostic guides for common faults.
General| Output | 3.54 mV RMS (5 cm/sec) |
|---|---|
| Power consumption | 15 W |
| Speeds | 33, 45 rpm |
| Frequency range | 20 - 20, 000 Hz |
| Drive system | Belt-drive |
| Tonearm | Tangential tracking tonearm |
| Wow and flutter | 0.06% |
| Stylus pressure | 1.5 g |
| Channel separation | > 25 dB |
| Platter | Aluminum platter |
To Next Page