What to do if Banner Measuring Instruments output is short-circuited?
If the output of your Banner Measuring Instruments is short-circuited, check the wiring for an electrical short circuit and ensure that the wiring is correct.
What to do if Banner Measuring Instruments signal is saturated?
If the signal of your Banner Measuring Instruments is saturated (too much light), reposition the sensor or the target to increase the detection distance, or increase the angle of incidence between the sensor and the target.
General| Type | Laser Distance Sensor |
|---|---|
| Housing Material | ABS |
| Lens Material | Acrylic |
| Indicators | LED |
| Special Feature | Background Suppression |
| Protection Rating | IP67 |
| QD Length | 2 m |
| Housing Style | Rectangular |
| Measurement Range | 2000 mm |
| Output | Analog |
| Power Supply | 12 V DC to 30 V DC |
| Operating Temperature | -10 to +50 °C |
| Adjustments | Potentiometer |
| Vibration | 10 to 55 Hz, 1 mm amplitude, X, Y, Z directions for 2 hours |
| Shock | 30 G, 11 ms, X, Y, Z directions, 6 times |
| Connection | M12 |
| Sensing Range | 0.15 m to 2 m |
Crucial safety precautions and specifications related to the laser.
Highlights the key features and capabilities of the sensor.
Visual representation of sensor wiring configurations for different outputs.
Setting light operate, dark operate, complementary, and other output modes.
Choosing between various TEACH modes like 2-Point, Dynamic, FGS, BGS, Dual.
Configuring adaptive tracking for stable detection under varying conditions.
Using remote input for sensor programming and TEACH selection.
Securing the sensor by locking or unlocking its buttons.
Step-by-step guide for performing a two-point static background suppression teach.
Procedure for dynamic background suppression teach during machine operation.
Teaching process for foreground suppression using a single window.
Procedure for one-point background suppression teach.
Teaching procedure combining distance and light intensity for detection.
To Next Page