Banner TL50 Pro Series - Page 11

Elevated Mount System
Model Features Components
SA-M30TE12 - Black Acetal • Streamlined black acetal or white UHMW stand-off
pipe adapter/cover
• Connects between 30 mm light base and ½ in. NPSM/
DN15 pipe
• Mounting hardware included
SA-M30TE12C - White UHMW
Polished 304 Stainless
Steel
Black Anodized
Aluminum
Clear Anodized
Aluminum
• Elevated-use stand-off pipe (½ in. NPSM/DN15)
• Polished 304 stainless steel, black anodized
aluminum, or clear anodized aluminum surface
• ½ in. NPT thread at both ends
• Compatible with most industrial environments
SOP-E12-150SS
150 mm (6 in) long
SOP-E12-150A
150 mm (6 in) long
SOP-E12-150AC
150 mm (6 in) long
SOP-E12-300SS
300 mm (12 in) long
SOP-E12-300A
300 mm (12 in) long
SOP-E12-300AC
300 mm (12 in) long
SOP-E12-900SS
900 mm (36 in) long
SOP-E12-900A
900 mm (36 in) long
SOP-E12-900AC
900 mm (36 in) long
SA-E12M30 - Black Acetal • Streamlined black acetal or white UHMW mounting
base adapter/cover
• Connects between ½ in. NPSM/DN15 pipe and 30
mm (1-3/16 in) drilled hole
• Mounting hardware included
SA-E12M30C - White UHMW
Pipe Mounting Flange
Pipe Mounting Flange
Model Features Construction
SA-F12
• Elevated-use stand-off pipes (½ in,
NPSM/DN15)
• M5 mounting hardware and nitrile gasket
included
Die-cast zinc base with black
paint
10
ø28
ø70
1/2-14
NPSM
4x ø5.5
54
SA-F12-3
• Elevated-use stand-off pipes (½ in,
NPSM/DN15)
• M4 mounting hardware and nitrile blend
gasket included
Black Polycarbonate
29
8.77
ø60
ø40
2 x 120°
1/2-14 NPSM
Foldable Mounting Brackets
Foldable Mounting Brackets
Model Features Construction
SA-FFB12
• For use with 1/2 inch stand-off pipes
• Stainless steel hardware
Black polycarbonate
111
110°
1/2-14 NPSM
4 x Ø5
Ø70
SA-FFB12C Gray polycarbonate
TL50 Pro Tower Light
P/N 209142 Rev. D www.bannerengineering.com - Tel: + 1 888 373 6767 11