Banner TL50 User Manual

Original Instructions
December 19, 2023
p/n: 237795 Rev. A
TL50 Basic Wireless Andon Tower Light
Instruction Manual
•
•
•
•
•
•
•

Features
Multi-Color and Audible Andon Indicators


Rugged,cost-effective,andeasy-to-installAndonindicators
IlluminatedtowerlightsegmentsandAndonboxindicatorsprovideeasy-to-seestatus
Four available colors: blue, green, yellow, and red
Integral four capacitive touch button controller with status LEDs
Steady or flashing status capability
300 mm pre-assembled stand-off pipe length
TwowirelessISMradiooptions:900MHzand2.4GHz
Models
Model LCA130T Controller Radio Frequency Tower Light Description
LCA130T4DXN2-TL50BGYR300Q 2.4 GHz TL50 Basic Andon Tower Light (Blue, Green, Yellow, Red)
LCA130T4DXN9-TL50BGYR300Q 900 MHz TL50 Basic Andon Tower Light (Blue, Green, Yellow, Red)
TL50-LCA130T Switch Diagrams
The control box status LED mimics the tower light status in color and animation.
Tap one of the buttons to turn the corresponding status LED on or off. Hold the button to activate the flashing function.
4
3
2
1
LED Key:
1=Blue
2=Green
3=Yellow
4=Red
InputPinout-AllModels
4-Pin M12 Male Connector Pin Wire Color Wiring Description
1
4
3
2
1 Brown (bn) 18VDCto30VDC
2 White (wh) Use to configure with the Pro Editor Configuration software
3 Blue (bu) DC common (GND)
4 Black (bk) Not Used
Configuration Instructions
LCA130T DIP Switches
Before applying power to the device, set the radio's DIP switches.
© Banner Engineering Corp.

Banner TL50 Specifications

General

Brand	Banner
Model	TL50
Category	Lighting Equipment
Language	English

Summary

Features

Key Features Overview

Highlights ruggedness, ease of installation, and multi-color/audible capabilities.

Models

LCA130T Model Selection

Lists available LCA130T models by part number, radio frequency, and description.

Switch Diagrams and Pinouts

LED Key and Button Operation

Explains LED indicators and how to use buttons for status and flashing.

4-Pin M12 Connector Pinout

Details the pin assignments and wire colors for the M12 connector.

Configuration Instructions

LCA130T DIP Switch Setup

Guide for setting the LCA130T's DIP switches before applying power.

Binding and Device Addressing

Bind LCA130T to DXM

Step-by-step procedure to bind LCA130T to a DXM and assign a node address.

LED Behavior and Node Status

LED Status Indicators

Describes LED color patterns for radio link status, binding mode, and errors.

Modbus Register Mapping

Input/Output Registers

Lists Modbus registers for inputs, outputs, and control messages.

Light Behavior Register Values

Details register values for solid and flashing light behaviors based on button inputs.

Specifications

Supply Voltage and Current

Specifies the required DC supply voltage and current for the device.

Electrical and Radio Specifications

Required Overcurrent Protection

Outlines necessary overcurrent protection for electrical connections per codes.

Radio Compliance

Details FCC and ETSI/EN compliance for 900 MHz and 2.4 GHz radio modules.

Operating Frequency and Range

Specifies operating frequencies, ranges, and antenna separation distances.

Dimensions

Product Dimensions

Provides overall physical dimensions for the tower light assembly.

Physical Dimensions and Configurations

Model Dimensions

Detailed measurements for standard and audible models, including height.

Tower Light Heights

Lists the heights of the tower light segments for different configurations.

Accessories

Power Supply Options

Lists available 24 V DC power supplies with input/output specifications.

Cordsets

Single-Ended M12 Cordsets

Details single-ended M12 cordset models, lengths, dimensions, and pinouts.

Cordsets

Double-Ended M12 Cordsets

Details double-ended M12 cordset models, lengths, dimensions, and pinouts.

Limited Warranty

Warranty Terms and Conditions

Outlines the product warranty period, coverage, and limitations.