Figure 2. Compact and Beacon Model Dimensions
12
[0.47]
M30 x 1.5
M12 x 1
45
[1.77]
19
[0.75]
8.4
[0.33]
H
Table 2: Compact and Beacon Models
# of Segments
Non-Audible
Standard
Audible
Sealed Audible
Omni-
Directional
Sealed Audible
1 46.2 (1.9) 77.1 (3.1) 110.2 (4) 114.2 (4.5)
2 72 (2.9) 102.9 (4.1) 126 (5) 140 (5.5)
3 97.8 (123.6) 128.7 (5.1) 151.8 (6) 165.8 (6.5)
4 123.6 (4.9) 154.5 (6.1) 177.6 (7) 191.6 (7.5)
5 149.4 (5.9) 180.3 (7.1) 203.4 (8) 217.4 (8.5)
6 175.2 (6.9) 206.1 (8.1) 229.2 (9) 243.2 (9.5)
7 201 (7.9) 231.9 (9.1) 255 (10) 269 (10.5)
Accessories
Pro Editor Hardware
MQDC-506-USB
• Pro Converter Cable
• 1.83 m (6 ft) length 5-pin M12
quick disconnect to Device and
USB to PC
• Required for connection to Pro
Editor
CSB-M1251FM1251M
• 5-pin parallel Y splitter (Male-Male-
Female)
• For full Pro Editor preview
capability
• Requires external power supply,
sold separately
PSW-24-1
• 24 V DC, 1 A power supply
• 2 m (6.5 ft) PVC cable with M12
quick disconnect
• Provides external power with
splitter cable, sold separately
ACC-PRO-CABLE5
• Mating accessory for cabled and
terminal models
• 150 mm (6 inch) PVC cable with
M12 quick disconnect
• Lever wire nuts included (qty 5)
• Required to connect cabled
models and screw terminal models
to Pro Converter Cable, sold
separately
MQDC-801-5M-PRO
• 8-pin to 5-pin double-ended
cordset
• 0.31 m (1 ft) PVC cable with M12
quick disconnects
• Required to connect 8-pin Pro
Series-enabled devices to Pro
Converter Cable (MQDC-506-
USB), sold separately
TL50 Pro Tower Light
P/N 209142 Rev. D www.bannerengineering.com - Tel: + 1 888 373 6767 7
To Next Page
Loading...
