Need help?Do you have a question about the Banner XS26-2de and is the answer not in the manual?
General| Supply Voltage | 10 - 30 V DC |
|---|---|
| Housing Material | Plastic |
| Output Type | Digital |
| Output Current | 100 mA |
| Protection Rating | IP67 |
| Output | PNP |
| Sensing Distance | 2 m |
| Connection Type | Cable |
Critical safety instructions and user responsibilities for proper operation of the Safety Controller.
Step-by-step instructions for downloading and installing the Banner Safety Controller Software.
Guidelines for mounting the Safety Controller on a DIN rail and environmental considerations.
Emphasizes the controller is complementary and requires risk assessment for safe application.
Discusses safety circuit integrity levels, Categories, and Performance Levels based on ISO 13849-1.
Outlines the steps required to complete and confirm a configuration for the safety controller.
Explains the process of verifying, saving, and sending a configuration to the controller.
Describes entering Configuration Mode to copy or write configurations to/from an SC-XM2/3 drive.
Outlines the schedule for initial setup, commissioning, periodic, and daily checkout procedures.
Details the procedure for verifying system operation before placing the machine into service.
Describes startup configuration, verifying input/output function, and checking safety operation.
Explains input lockout conditions and system faults that may cause the controller to turn off safety outputs.
Provides steps to recover from a lockout condition, including system reset.
To Next Page
