BANTE 900P - Keypad Operations; Key Functions

Bante900P Portable Multiparameter Water Quality Meter
3
Keypad
The meter has a succinct membrane keypad, names and symbols describe the each function key controls.
INDEX:
KEY
DESCRIPTION
MEAS|
● Power the meter ON/OFF.
● Freezes the measured value on the display, press the key again to resume measuring.
● In the calibration or setting mode, exits current mode and returns to measurement.
MODE|
o
C
● Toggles between available measurement modes (pH, mV, ORP, Ion, Conductivity, TDS, Salinity, Resistivity, DO).
● Press and hold the key to enter temperature setting mode.
CAL|
● Press the key to enter the calibration mode.
● Press and hold the key to enter the setup menu.
MI|
● Press the key to store current measured value.
● Press  key in setup mode to scroll up through menu.
● Press  key in temperature setting mode to increase the setting value.
MR|
● Press the key to view calibration report or stored data.
● Press  key in setup mode to scroll down through menu.
● Press  key in temperature setting mode to decrease the setting value.
ENTER|
● Confirms the calibration, setting value or displayed option.
● Press and hold the key to turn On/Off the backlight.