BANTE 900P - Setup Menu; pH Mode Configuration; ORP Mode Configuration; Ion Mode Configuration

Bante900P Portable Multiparameter Water Quality Meter
8
Setup Menu
Bante900P portable multiparameter water quality meter contains an integrated setup menu that allows you to customize each displayed option to meet
measurement requirements. In the different modes, the meter will show the corresponding options. For the general options, once it is changed that will
be applied to all modes.
pH MODE:
PARAMETER
DESCRIPTION
OPTIONS
DESCRIPTION
DEFAULT
pH Buffers:
Select your desired pH buffer group for calibration
and auto-recognition.
USA (1.68, 4.01, 7.00, 10.01, 12.45)
●
NIST (1.68, 4.01, 6.96, 9.18, 12.45)
DIN (1.09, 4.65, 6.79, 9.23, 12.75)
User-Defined Buffer
Calibration Points:
Select the number of calibration points you intend
to calibrate the meter.
1 point
2 points
3 points
●
4 points
5 points
Resolution:
Sets the resolution for pH measurement.
0.001pH
●
0.01pH
0.1pH
Measurement Unit:
Sets the default temperature unit.
Degrees Celsius
●
Degrees Fahrenheit
ORP MODE:
PARAMETER
DESCRIPTION
OPTIONS
DESCRIPTION
DEFAULT
Resolution:
Sets the resolution for ORP measurement.
0.1mV
●
1mV
ION MODE:
PARAMETER
DESCRIPTION
OPTIONS
DESCRIPTION
DEFAULT
Measurement Unit:
Sets the default ion concentration and temperature
units.
ppm
Parts per million
●
mg/L
Milligrams per liter
mol/L
Moles per liter
Degrees Celsius
●
Degrees Fahrenheit