Need help?Do you have a question about the Baofeng UV-5G PRO and is the answer not in the manual?
General| Frequency Range | 136-174 MHz, 400-520 MHz |
|---|---|
| Channels | 128 |
| Battery Capacity | 1800mAh |
| Display | LCD |
| Dimensions | 110 x 58 x 32 mm |
| Operating Voltage | 7.4V |
| Modulation Type | FM |
| Antenna Impedance | 50 Ohms |
| Operating Temperature | -20°C to +60°C |
| Output Power | 5W |
| Antenna | Detachable |
| Channel Spacing | 25 kHz |
Safety instructions and RF energy awareness for product usage.
RF exposure guidelines and safe usage of handheld devices.
Warning about unauthorized modifications and user authority.
Compliance with FCC rules and general safety precautions.
Guidelines for safe human exposure to radio frequency energy.
Safe operating distances and accessory compliance for usage.
Requirement for an FCC license to operate on GMRS frequencies.
Warnings regarding part substitutions and FCC rule compliance.
Restrictions on using the radio in hazardous or prohibited locations.
Best practices for using the radio and its accessories.
Safety rules for charging batteries in various environments.
Guidelines for cleaning and maintaining battery performance.
Rules for safely transporting batteries with the radio.
List of items included in the radio package.
Overview of the radio's primary functionalities and capabilities.
Initial charging procedure and battery conditioning.
Using the designated BAOFENG charger for safety.
Critical safety warnings for handling and charging Li-ion batteries.
Step-by-step guide for charging the battery pack.
Understanding the LED status during charging.
Procedures for attaching and detaching the radio antenna.
How to securely attach the belt clip to the radio.
Correct method for attaching and securing the battery.
Connecting optional external audio accessories.
Identification of all physical buttons and their functions.
Detailed explanation of radio's main components and controls.
Interpretation of icons and symbols on the radio's display.
Meaning of the status LED during operation.
Functions and operations of the radio's keypad.
Step-by-step guide to turn the radio on and off.
How to control the audio volume.
Procedures for initiating and receiving radio transmissions.
Switching between Frequency and Memory modes.
How to operate the radio using direct frequency input.
How to operate the radio using pre-programmed channels.
How to scan for active frequencies.
How to scan through programmed channels.
Scanning for CTCSS and DCS tones for communication.
How to monitor two channels simultaneously.
Navigating between dual displays.
Quickly switching between transmission power levels.
Preventing accidental button presses.
Listening to broadcast FM radio.
Using the built-in LED flashlight.
Sending specific tone bursts for repeater access.
Using DTMF for signaling and remote control.
Automatic search for active frequencies.
Navigating menu items using arrow keys.
Accessing menu settings via numerical shortcuts.
Common issues, their causes, and resolution steps.
Frequency range supported for receiving signals.
Frequency range supported for transmitting signals.
Maximum number of programmable memory channels.
Details about the battery and power source.
Environmental limits for radio operation.
Physical size and weight of the radio.
Adjusting the squelch sensitivity to filter noise.
Setting the frequency increment for tuning.
Adjusting the radio's output power level.
Options for conserving battery life.
Enabling voice-activated transmission.
Selecting between wide and narrow bandwidth.
Configuring the automatic backlight behavior.
Settings for monitoring two channels.
Enabling or disabling audible key press feedback.
Setting a limit for continuous transmission.
Configuring DCS code reception.
Configuring CTCSS tone reception.
Configuring DCS code transmission.
Configuring CTCSS tone transmission.
Enabling voice prompts for radio status.
Settings for Automatic Number Identification.
Configuration for DTMF tone settings.
Settings for signal codes.
How the scanner resumes after detecting a signal.
Settings for transmitting PTT ID codes.
Delay settings for PTT ID transmission.
Display options for channel A.
Display options for channel B.
Preventing transmission on occupied channels.
Automatic locking of the keypad.
Direction of frequency shift for repeater use.
Magnitude of the frequency offset.
Creating and modifying memory channels.
Removing programmed memory channels.
Setting the color of the standby LED backlight.
Setting the color of the receive LED backlight.
Setting the color of the transmit LED backlight.
Configuring different alarm notification types.
Setting transmit priority in Dual Watch mode.
Eliminating squelch tail noise in direct communication.
Eliminating squelch tail noise when communicating via repeater.
Delaying the repeater's squelch tail tone.
Customizing the message displayed on power-on.
Enabling the end-of-transmission tone.
Resetting the radio to factory default settings.
Channel number identifier.
Specific frequency assigned to each channel.
Indicates if the channel is GMRS, FRS, or Repeater.
Transmission power level (High/Low) for each channel.
Numerical index for DCS codes.
The actual Digital Coded Squelch code value.
Numerical index for CTCSS tones.
The frequency of the Continuous Tone-Controlled Squelch System tone.
Identifier for NOAA weather channels.
Reception frequency in MHz for weather broadcasts.
Name of the NOAA weather broadcast channel.
Manufacturer's name, address, and website.
To Next Page
