Why is my Baofeng UV-82 Radio receiving transmissions from unwanted users?
To resolve this, make sure you're on the same frequency as the people you want to talk to. Also, ensure that the CTCSS undertones or DCS codes are programmed to match those of the individuals you're trying to communicate with.
What to do if no one can hear me on my Baofeng Radio?
To fix this problem, check that the CTCSS undertones or DCS codes are programmed correctly to match those of the people you're trying to communicate with. Also, make sure you're within broadcasting range and that your signal isn't blocked by your surroundings.
What to do if my Baofeng UV-82 Radio receiving indicator lights up but no sound comes out?
First, make sure the volume isn't set too low by turning the knob up. Then, ensure that the CTCSS undertones or DCS codes are programmed to match those of the people you're trying to communicate with.
Why is the sound quality bad on my Baofeng UV-82?
The poor communication quality may be due to being out of broadcasting range or obstructions impeding the signal. Ensure that you are within broadcasting range of the rest of the people in your group, and that your signal is not being impeded by your local surroundings.
How to fix a Baofeng Radio that won't turn on?
There are a couple of things you can check: 1. Replace the battery with a charged one or charge the existing battery. 2. Try removing the battery and then re-attaching it to make sure it's properly connected.
Why does my Baofeng Radio transmit without pressing the PTT button?
This may be happening because the VOX setting on your radio is set to be too sensitive. Try adjusting the VOX setting.
Why does my Baofeng UV-82 Radio battery drain so fast?
First, make sure the battery is fully charged before you use it. If the battery still drains quickly, it might be at the end of its life and need to be replaced.
Step-by-step guide for charging the radio or battery using the provided charger.
Details on the numeric keypad, Pound, Star buttons and their functions.
Instructions for turning the radio on/off and adjusting the volume using the power/volume knob.
Explains how to navigate and use the radio's menu system and shortcuts.
Details on enabling scanning and its different modes: Time, Carrier, and Search.
Enabling, disabling, and locking the Dual Watch feature for monitoring two channels.
Steps to set up Receiver and Transmitter CTCSS and DCS codes for squelch control.
Guide to manually saving frequencies and settings into memory channels.
Instructions for using PC software and cable for advanced radio programming.
Procedure for copying settings from one radio to another using a cloning cable.
Details on creating and managing memory channels (MEM-CH).
General| Channels | 128 |
|---|---|
| Battery Capacity | 2800 mAh |
| Dual Band | Yes |
| Dual Watch | Yes |
| Antenna | High gain Dual Band antenna |
| Operating Voltage | 7.4V DC |
| Antenna Impedance | 50 ohms |
| Operating Temperature | -20°C to +60°C |
| Waterproof | No |
| Frequency Range | 136-174 MHz / 400-520 MHz |
| Power Output | 1W / 5W |
| Channel Spacing | 25 kHz (wide band) / 12.5 kHz (narrow band) |
To Next Page
