Why doesn’t my Baofeng Radio battery recharge last long?
If your Baofeng Radio's battery recharge doesn’t last long, it could be due to an old battery pack. If so, replace it with a new one. Also, ensure the battery pack is completely charged.
What to do if the reception LED is on but no sound is heard on my Baofeng Radio?
If the reception LED is on but you're not hearing any sound from your Baofeng Radio, ensure that the volume isn't set too low. Also, verify that you are using the same CTCSS and DCS codes as the rest of your group.
What to do if my Baofeng UV-5RM PLUS Radio is receiving other group signals while transmitting?
If you are receiving another group's signal while transmitting on your Baofeng Radio, change to another CTCSS/DCS code for your group.
Why doesn’t the keypad work on my Baofeng UV-5RM PLUS?
If the keypad on your Baofeng Radio isn’t working, the keypad lock function might not have been enabled.
Warning about amateur radio license requirements for European users.
Advice on programming and reading RF exposure safety information.
Details on features specific to M and L versions of the radio.
Covers EU, FCC, and IC regulatory compliance and safety guidelines.
Details safe operating distances for hand-held and body-worn use.
Lists prohibitions and important tips for battery handling and charging.
Provides guidelines for maintaining battery health, charging, and transportation safety.
Offers advice on handling and storing the radio to ensure longevity.
Lists key functionalities and specifications of the radio.
Lists all items included in the radio package and battery handling warnings.
Step-by-step guide on how to charge the battery and LED indicator meanings.
Recommendations for storing the battery and using the Type-C USB charger.
How to attach/detach antenna, belt clip, and install/remove battery pack.
Instructions for connecting an optional external speaker/microphone.
Identifies and explains the function of each button and control on the radio.
Explains LCD icons, battery indicator, and status LED meanings.
Details functions of main keypad, side keys, and special function keys.
Step-by-step instructions for turning the radio on/off and adjusting volume.
Using Frequency (VFO) and Channel (MR) modes for operation.
Guide to initiating calls using PTT and receiving signals.
Using FM radio, monitor, keypad lock, and frequency reversal.
Sending repeater tones, frequency search, and NOAA weather radio functions.
Guides on navigating menus, basic operations, and using shortcuts.
Covers general scanning, modes, frequency, channel, CTCSS/DCS scanning.
Manual channel programming, repeater, and simplex channel setup.
Enabling VOX, setting up Dual Watch, and activating the scrambler.
Using DTMF and customizing display, beep, voice, language, Roger beep.
Selecting working modes, power-on messages, passwords, and radio reset.
Resetting radio settings to VFO or All defaults.
Adjusting squelch, frequency step, transmit power, and enabling VOX.
Configuring bandwidth, backlight, dual watch, and keypad beep.
Scanning CTCSS/DCS, managing codes, scanner resume, and PTT-ID settings.
Configuring display formats, lockouts, frequency shifts, and memory channels.
Settings for alarm modes, tone bursts, timers, and power-on messages.
Accessing hardware and firmware version information.
Solutions for issues preventing power-on or causing weak reception.
Resolving problems with communication and fixing interference or unwanted noise.
Details receiver/transmission frequencies, channel spacing, voltage, and current.
To Next Page
General
