Baofeng UV-5RM PLUS - Working Modes and Power-On Options

Press key to confirm and exit to return to stand-by mode.
6.10.3 Voice function (VOICE) - MENU 17
In standby mode, press + 17; the screen will display “VOICE”.
Press key to enter the function. Press the / keys to select OFF/ON. Confirm your selection by pressing MENU.
To return to the standby mode press key.
6.10.4 Language of the MENU (LANGUAGE) - MENU 18
This section shows the language of the MENU (English).
In standby mode press + 18. The display will show “LANGUAGE”.
6.10.5 Working Mode (MDF-A) - MENU 24
The radio has four working modes available:
• Frequency mode (FREQ)
• Channel mode (CH)
• Channel name (NAME)
To shift from one mode to another one:
In Standby mode press + 24; select the desired working mode with the / keys.
Press key again to confirm your selection.
6.10.6 Roger Beep, end Transmission Tone (ROGER) - MENU 36
Roger Beep can be enabled/disabled:
• OFF: Roger Beep disabled
• ON: Roger Beep tone at the end of transmission
In standby mode, press + 36; the screen will display “ROGER”.
Press to enter the function. Press the / keys to select OFF/ON. Confirm your selection by press key.
To return to the standby mode press key.
6.10.7 Power On Message (POWER ON MSG) - MENU 40
With this Menu you can customize the welcome message that appears on the display when the radio is switched on.
Choose amongst the following options:
-28-